This is an entry for Phoronix LCH. Feel free to comment on the Linux compatibility for the Maxtor 53073H4 30 GB ATA in this thread.
Maxtor 53073H4 30 GB ATA
Description: Maxtor 30GB ATA
Hardware Notes:
hdparm -I /dev/hdc
ATA device, with non-removable media
Model Number: Maxtor 53073H4
Serial Number: F40D1R0C
Firmware Revision: JAC61HU0
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 0
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 60030432
device size with M = 1024*1024: 29311 MBytes
device size with M = 1000*1000: 30735 MBytes (30 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 57 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 192, current value: 192
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
SMART feature set
* Automatic Acoustic Management feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
Maxtor 53073H4 30 GB ATA
Description: Maxtor 30GB ATA
Hardware Notes:
hdparm -I /dev/hdc
ATA device, with non-removable media
Model Number: Maxtor 53073H4
Serial Number: F40D1R0C
Firmware Revision: JAC61HU0
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 0
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 60030432
device size with M = 1024*1024: 29311 MBytes
device size with M = 1000*1000: 30735 MBytes (30 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 57 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Advanced power management level: unknown setting (0x0000)
Recommended acoustic management value: 192, current value: 192
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
SMART feature set
* Automatic Acoustic Management feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct