Announcement

Collapse
No announcement yet.

Linux Compatibility: Via Via Rhine Network Adapter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Linux Compatibility: Via Via Rhine Network Adapter

    This is an entry for Phoronix LCH. Feel free to comment on the Linux compatibility for the Via Via Rhine Network Adapter in this thread.

    Via Via Rhine Network Adapter



    Description: Via Rhine 10/100Mbit network adapter onboard
    Hardware Notes: Works well under all linux distros haven't had any problem so far.

    lspci -v
    00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
    Subsystem: Micro-Star International Co., Ltd. Unknown device 7095
    Flags: bus master, medium devsel, latency 32, IRQ 193
    I/O ports at e900 [size=256]
    Memory at e3012000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [40] Power Management version 2

    lshw
    *-network:1
    description: Ethernet interface
    product: VT6102 [Rhine-II]
    vendor: VIA Technologies, Inc.
    physical id: 12
    bus info: pci@00:12.0
    logical name: eth0
    version: 78
    serial: 00:0c:76:ae:a6:8e
    size: 100MB/s
    capacity: 100MB/s
    width: 32 bits
    clock: 33MHz
    capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegociation
    configuration: autonegociation=on broadcast=yes driver=via-rhine driverversion=1.2.0-2.6 duplex=full ip=***.***.***.*** link=yes multicast=yes port=MII speed=100MB/s
    resources: ioport:e900-e9ff iomemory:e3012000-e30120ff irq:193
Working...
X