ATI HD3400 /// artifacts with kernels 2.6.32-rc5 and upwards

[dolphin77]

Hello everybody.

I have a sony laptop with ATI HD3400 Videocard. I use Slackware64-current, mesa, libdrm, ati ddx from GIT. I tried kernels 2.6.32 different release candidates.

I am very happy with performance of ATI opensource drivers. Thanks for the people developing this.

Unfortunately I discovered that while with 2.6.32-rc3 everything works very stable, KMS, 3d peformance is very good and there are no hangups or etc.

But with kernels 2.6.32-rc5, 2.6.32-rc6 (didn't try different ones) - Everything works nice but after login in into X and working around with GTK applications there are some artifacts occuring on my destktop (like parts of one windows are showing themselves on the other windows, and this "dust" remains on the screen). I am not sure where this comes from. I use KDE 4.3.3, QT-curves GTK theme. Once again, with 2.6.32-rc3 - there is no such effect.

Thank you in advance for any suggestions.

best regards,
Vladimir

[darkbasic]

Same problem here with gentoo amd64, 2.6.32-rc6-git3, mesa git, libdrm git, ati ddx git and xserver 1.7.1.
I have not tried -rc3, but I noticed also terrible performances in 3D.
I have an HD3870.

[pingufunkybeat]

I get corruption after running for a while, especially after intensive 3D sessions (OpenArena). Usually some of the widgets and plasmoids get corrupted.

I've had this for a while, basically since switching to KMS, which for me coincided with 2.6.32-rc3, I believe.

Another problem I have is short freezes with 3D, every 2 seconds or so. Also since switching to KMS. You get it with wobbly windows (wobble them for a few seconds), with glxgears, and it is especially annoying in OpenArena (try strafejumping if the display freezes regularly )

It seems to be better immediately after logging in, and gets progressively worse, so it might be a memory problem / leak.

EDIT: 2.6.32-rc6, git (master) libdrm, mesa and ati-radeon, X 1.6, KDE4, HD-4550

[agd5f]

There are quite a few fixes in drm-next that haven't been pushed to Linus yet. See this link for more information:

http://wiki.x.org/wiki/radeonBuildHowTo

[dolphin77]

Yeah, but what I am trying to underline is that with 2.6.32-rc3 everything works fine for me!!!

I am not a programmer and it is really hard for me to read/understand patches and other code. What really surprises me is that with -rc3 it is ok, but with -rc5 and more important -rc6 I have this bug. Due to this I have to run -rc3 which I believe has some security issues.

Maybe some newer code which was added to kernel causes this.

[dolphin77]

My scripts for git versions of libdrm, mesa and xf86-ati:

get-libdrm.sh:

rm -rf libdrm
git clone git://cgit.freedesktop.org/mesa/drm
( cd drm ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
DATE=$(date +%Y%m%d)
mv drm libdrm-${DATE}_git
tar cjf libdrm-${DATE}_git.tar.bz2 libdrm-${DATE}_git
rm -rf libdrm-${DATE}_git

libdrm.SlackBuild:

#!/bin/sh                                      
PKGNAM=libdrm
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}       
NUMJOBS=${NUMJOBS:-" -j7 "}
BUILD=${BUILD:-1}          

CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-${PKGNAM}

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "s390" ]; then          
  SLKCFLAGS="-O2"                        
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "x86_64" ]; then        
  SLKCFLAGS="-O2 -fPIC"                  
  LIBDIRSUFFIX="64"                      
fi                                       

rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP           
rm -rf ${PKGNAM}-${VERSION}
tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
cd ${PKGNAM}-$VERSION                            

# Make sure ownerships and permissions are sane:
chown -R root:root .                            
find . \                                        
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \                                           
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \                                                                            
  -exec chmod 644 {} \;                                                         

# Configure:
./autogen.sh
CFLAGS="$SLKCFLAGS" \
./configure \        
  --prefix=/usr \    
  --enable-radeon-experimental-api \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --build=$ARCH-slackware-linux     

# Build and install:
make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null

# Compress and link manpages, if any:
if [ -d $PKG/usr/man ]; then
  ( cd $PKG/usr/man
    for manpagedir in $(find . -type d -name "man*") ; do
      ( cd $manpagedir
        for eachpage in $( find . -type l -maxdepth 1) ; do
          ln -s $( readlink $eachpage ).gz $eachpage.gz
          rm $eachpage
        done
        gzip -9 *.?
      )
    done
  )
fi

# Compress info files, if any:
if [ -d $PKG/usr/info ]; then
  ( cd $PKG/usr/info
    rm -f dir
    gzip -9 *
  )
fi

# Add a documentation directory:
mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
cp -a \
  README \
  $PKG/usr/doc/${PKGNAM}-$VERSION

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $TMP/package-${PKGNAM}
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz

mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD

get-mesa.sh:

rm -rf mesa
git clone git://cgit.freedesktop.org/git/mesa/mesa
cd mesa
git checkout -t -b master origin/master
cd ..
# package the source archive and clean up:
( cd mesa ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
DATE=$(date +%Y%m%d)
mv mesa mesa-${DATE}_git
tar cjf mesa-${DATE}_git.tar.bz2 mesa-${DATE}_git
rm -rf mesa-${DATE}_git

mesa.SlackBuild:

#!/bin/sh
PKGNAM=mesa
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}       
BUILD=${BUILD:-1}          

DRI_DRIVERS="r300,r600,radeon,ffb,swrast"

NUMJOBS=${NUMJOBS:--j8}

CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-mesa

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "x86_64" ]; then        
  SLKCFLAGS="-O2 -fPIC"                  
  LIBDIRSUFFIX="64"                      
else                                     
  SLKCFLAGS="-O2"                        
  LIBDIRSUFFIX=""                        
fi                                       

rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP           
rm -rf mesa-${VERSION}
tar xvf $CWD/mesa-${VERSION}.tar.bz2 || exit 1
cd mesa-$VERSION                              

# Make sure ownerships and permissions are sane:
chown -R root:root .                            
find . \                                        
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \                                           
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \                                                                            
  -exec chmod 644 {} \;                                                         


./autogen.sh

CFLAGS="$SLKCFLAGS" \
./configure \        
  --prefix=/usr \    
  --sysconfdir=/etc \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --mandir=/usr/man \               
  --docdir=/usr/doc/mesa-$VERSION \ 
  --with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
  --with-dri-drivers="$DRI_DRIVERS" \                            
  --disable-gallium \                                            
  --enable-debug \                                               
  --build=$ARCH-slackware-linux                                  

make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1

# Install gears and glinfo manually, and make symlinks from the names
# of the deprecated similar programs to reduce confusion:            
mkdir -p $PKG/usr/bin                                                
cp -a progs/demos/gears $PKG/usr/bin/gears                           
cp -a progs/demos/glinfo $PKG/usr/bin/glinfo                         
( cd $PKG/usr/bin                                                    
  ln -sf glinfo glxinfo                                              
  ln -sf gears glxgears                                              
)                                                                    

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null

# Compress and link manpages, if any:
if [ -d $PKG/usr/man ]; then
  ( cd $PKG/usr/man
    for manpagedir in $(find . -type d -name "man*") ; do
      ( cd $manpagedir
        for eachpage in $( find . -type l -maxdepth 1) ; do
          ln -s $( readlink $eachpage ).gz $eachpage.gz
          rm $eachpage
        done
        gzip -9 *.?
      )
    done
  )
fi

# Compress info files, if any:
if [ -d $PKG/usr/info ]; then
  ( cd $PKG/usr/info
    rm -f dir
    gzip -9 *
  )
fi

mkdir -p $PKG/usr/doc/mesa-$VERSION/html
cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/mesa-$VERSION
rm -f docs/relnotes*.html docs/RELNOTES*
cp -a docs/*.html $PKG/usr/doc/mesa-$VERSION/html

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD

get-xf86-video-ati.sh:

rm -rf xf86-video-ati
git clone git://cgit.freedesktop.org/git/xorg/driver/xf86-video-ati
cd xf86-video-ati
#git checkout -t -b master origin/master
cd ..
# package the source archive and clean up:
( cd xf86-video-ati ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
DATE=$(date +%Y%m%d)
mv xf86-video-ati xf86-video-ati-${DATE}_git
tar cjf xf86-video-ati-${DATE}_git.tar.bz2 xf86-video-ati-${DATE}_git
rm -rf xf86-video-ati-${DATE}_git

xf86-video-ati.SlackBuild:

 
#!/bin/sh                                              
PKGNAM=xf86-video-ati
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}       
BUILD=${BUILD:-1}          

# Be sure this list is up-to-date:

NUMJOBS=${NUMJOBS:--j8}
CWD=$(pwd)             
TMP=${TMP:-/tmp}       
PKG=$TMP/package-xf86-video-ati

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "x86_64" ]; then        
  SLKCFLAGS="-O2 -fPIC"                  
  LIBDIRSUFFIX="64"                      
else                                     
  SLKCFLAGS="-O2"                        
  LIBDIRSUFFIX=""                        
fi                                       

rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP           
rm -rf xf86-video-ati-${VERSION}
tar xvf $CWD/xf86-video-ati-${VERSION}.tar.bz2 || exit 1
cd xf86-video-ati-$VERSION

# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;

./autogen.sh

CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --sysconfdir=/etc \
  --build=$ARCH-slackware-linux

# Nobody else is enabling this.  Seems like it's asking for trouble.
#  --enable-xcb

make $NUMJOBS
make install DESTDIR=$PKG

mkdir -p $PKG/usr/doc/xf86-video-ati-$VERSION/html
cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/xf86-video-ati-$VERSION
rm -f docs/relnotes*.html docs/RELNOTES*
cp -a docs/*.html $PKG/usr/doc/xf86-video-ati-$VERSION/html

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD

[Kano]

Basically git has only one toplevel .git dir, you should not need find at all - your code looks like from svn.

[dolphin77]

to: Kano

thank you for correction. I will change scripts. Once again I am not a programmer and I do not remember origin of this scripts. Most probably you right and originally this was from some svn scripts of Slackware team (from /source folder).

But I do not think this would influence any further build procedure.

[agd5f]

Yeah, but what I am trying to underline is that with 2.6.32-rc3 everything works fine for me!!!

I am not a programmer and it is really hard for me to read/understand patches and other code. What really surprises me is that with -rc3 it is ok, but with -rc5 and more important -rc6 I have this bug. Due to this I have to run -rc3 which I believe has some security issues.

Maybe some newer code which was added to kernel causes this.

Yes there are some regressions that were fixed in drm-next, but haven't been pushed to Linus yet. You are most likely hitting this bug:

https://bugs.freedesktop.org/show_bug.cgi?id=24430

which is already fixed in drm-next.

[dolphin77]

Yes there are some regressions that were fixed in drm-next, but haven't been pushed to Linus yet. You are most likely hitting this bug:

https://bugs.freedesktop.org/show_bug.cgi?id=24430

which is already fixed in drm-next.

Thank you for hint. I will try to build drm-next when my daughter will go to sleep and post the result here.

Added:
Ok, so I am already here up and running about 20 minutes. I have here VirtualBox, Seamonkey, Firefox, Kontact, Konsole compiling few things, and video (in smplayer) playing. Looks pretty good. Up till now no problems. Now I'll ask my son to do some 3d testing.

Thank you, agd5f, my son looks really happy.

greetings from Ukraine.