Hi,
I would like to know if I'm the only one to encounter some problems I run into when a 2.6.31 kernel with drm-linus (as explained somewhere on freedesktop).
Here is the list of the problems I run into:
First of all, suspend doesn't work. I was expecting it to work as intended when David Airlie committed a few patches but it didn't :s.
Games stopped working using KMS. Dmesg gives me this :
"[drm:r600_cs_packet_parse] *ERROR* Can not parse packet at 597 after CS end 597 !
[drm:r600_packet3_check] *ERROR* bad DRAW_INDEX
[drm:radeon_cs_ioctl] *ERROR* Invalid command stream !"
-------
Edit: This has been fixed when recompiling everything once again from scratch. The problem still remains in a non-kms environment.
-------
Also, after a few hours of use, I start getting screen corruption like this: http://fs.mupuf.org/posted_images/r7...corruption.png
The last problem I run into is the time gtkperf takes to perform.
GtkPerf 0.40 - Starting testing: Thu Oct 15 17:34:35 2009
GtkEntry - time: 0,13
GtkComboBox - time: 4,17
GtkComboBoxEntry - time: 2,79
GtkSpinButton - time: 0,93
GtkProgressBar - time: 0,72
GtkToggleButton - time: 1,27
GtkCheckButton - time: 0,61
GtkRadioButton - time: 0,85
GtkTextView - Add text - time: 0,39
GtkTextView - Scroll - time: 0,98
GtkDrawingArea - Lines - time: 4,34
GtkDrawingArea - Circles - time: 11,22
GtkDrawingArea - Text - time: 40,88
GtkDrawingArea - Pixbufs - time: 3,25
---
Total time: 72,54
This is something that used to be quite good (It took 13 seconds to perform this test on Sept. 25, 2009) but I don't really know when It broke. I've been quite busy and so, I didn't took the time to bisect the regression.
Am I the only one ? Could this be because of my packaging ?
Thanks in advance
I would like to know if I'm the only one to encounter some problems I run into when a 2.6.31 kernel with drm-linus (as explained somewhere on freedesktop).
Here is the list of the problems I run into:
First of all, suspend doesn't work. I was expecting it to work as intended when David Airlie committed a few patches but it didn't :s.
Games stopped working using KMS. Dmesg gives me this :
"[drm:r600_cs_packet_parse] *ERROR* Can not parse packet at 597 after CS end 597 !
[drm:r600_packet3_check] *ERROR* bad DRAW_INDEX
[drm:radeon_cs_ioctl] *ERROR* Invalid command stream !"
-------
Edit: This has been fixed when recompiling everything once again from scratch. The problem still remains in a non-kms environment.
-------
Also, after a few hours of use, I start getting screen corruption like this: http://fs.mupuf.org/posted_images/r7...corruption.png
The last problem I run into is the time gtkperf takes to perform.
GtkPerf 0.40 - Starting testing: Thu Oct 15 17:34:35 2009
GtkEntry - time: 0,13
GtkComboBox - time: 4,17
GtkComboBoxEntry - time: 2,79
GtkSpinButton - time: 0,93
GtkProgressBar - time: 0,72
GtkToggleButton - time: 1,27
GtkCheckButton - time: 0,61
GtkRadioButton - time: 0,85
GtkTextView - Add text - time: 0,39
GtkTextView - Scroll - time: 0,98
GtkDrawingArea - Lines - time: 4,34
GtkDrawingArea - Circles - time: 11,22
GtkDrawingArea - Text - time: 40,88
GtkDrawingArea - Pixbufs - time: 3,25
---
Total time: 72,54
This is something that used to be quite good (It took 13 seconds to perform this test on Sept. 25, 2009) but I don't really know when It broke. I've been quite busy and so, I didn't took the time to bisect the regression.
Am I the only one ? Could this be because of my packaging ?
Thanks in advance
Comment