When Intel launched their LGA-775 socket back in 2004, little did they know the possibilities that this new socket design would offer. As I discovered today, it's quite a versatile socket. Why you may ask? Well what I have to show today may very well be one of the nerdiest ways to open a beer, while at the same time could be one of the most expensive bottle openers. Want to find out how? Keep reading!
As would be expected, the first step in opening a beer would be to grab the brew. For my purposes I used an Oberon. This LGA-opening strategy has only been tested with domestic products. As imports are sealed extremely tight it's more likely that you'll break the PCB before anything else...
With using an LGA-775 motherboard, the concept is to use the corner of the CPU socket to remove the cap. While shown today with an LGA-775 motherboard, this process can easily be adopted to any LGA motherboard (e.g. LGA-771 and LGA-1207).
Simply set the bottle on a flat surface, and use the LGA retention frame on the motherboard to catch the corner of the bottle cap, followed by pulling the motherboard up in an angular fashion. Opening a beer bottle with a motherboard socket isn't an easy process but with a bit of work it can be accomplished. Nor am I trying to portray this process as easy, as I had went through several tries (and motherboards) before developing a working model. This opening strategy was basically sparked out of curiosity.
As things are a bit hard to explain for this, a video have been recorded of the opening process. If you try it out, be sure to report back!
Ogg Theora (6.1MB) Download
(More videos from various angles, formats, etc... to come soon)
This may be an innovative way to open your drink, but it certainly comes as a costly opener. But if you're looking for a flashy way to break open that beer at a LAN party, there aren't many ways better than this. Happy drinking!
I nor Phoronix Networks will hold responsibility if you decide to attempt such a bottle opening. Performing these steps to open your brew will kill the motherboard, etc... Open at your own risk!!!
As would be expected, the first step in opening a beer would be to grab the brew. For my purposes I used an Oberon. This LGA-opening strategy has only been tested with domestic products. As imports are sealed extremely tight it's more likely that you'll break the PCB before anything else...
With using an LGA-775 motherboard, the concept is to use the corner of the CPU socket to remove the cap. While shown today with an LGA-775 motherboard, this process can easily be adopted to any LGA motherboard (e.g. LGA-771 and LGA-1207).
Simply set the bottle on a flat surface, and use the LGA retention frame on the motherboard to catch the corner of the bottle cap, followed by pulling the motherboard up in an angular fashion. Opening a beer bottle with a motherboard socket isn't an easy process but with a bit of work it can be accomplished. Nor am I trying to portray this process as easy, as I had went through several tries (and motherboards) before developing a working model. This opening strategy was basically sparked out of curiosity.
As things are a bit hard to explain for this, a video have been recorded of the opening process. If you try it out, be sure to report back!
Ogg Theora (6.1MB) Download
(More videos from various angles, formats, etc... to come soon)
This may be an innovative way to open your drink, but it certainly comes as a costly opener. But if you're looking for a flashy way to break open that beer at a LAN party, there aren't many ways better than this. Happy drinking!
I nor Phoronix Networks will hold responsibility if you decide to attempt such a bottle opening. Performing these steps to open your brew will kill the motherboard, etc... Open at your own risk!!!
Comment