Hi there,
I have a Thinkpad T400 w/HD3470 graphics adapter and 1440x900 resolution sitting in a port replicator (DVI out available, external TFT with 1280x1024 resolution). The laptop runs Ubuntu 9.04. First I tried the radeon driver which gave an average 3D performance (not too important) but very high temperatures, even while idling. Yes, I tried the new DynamicPM and ForceLowPowerMode - the temperatur goes down but is still around 55degC. On the other hand switching between single head and big desktop via xrandr works like a charm. Even after suspend/resume w/o having to restart the X-server.
With the catalyst driver (v9.6, 8.620) it's the other way round: very good performance, very low temperature (40-45degC - at least 10degC cooler!!) but much trouble whith the secondary monitor. X only starts up correctly if the external TFT is disconnected. Then I can switch the secondary display on via xrandr and use a big desktop. But after suspend/resume I have to restart the X-server - otherwise the external TFT would stay black, even though it is listed by xrandr. Even disabling and enabling it via the gnome multi-monitor utility does not help.
Any ideas are greatly appreciated!
I'll attach my xorg.conf below
Cheers,
Torsten
-------------------------
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "LEN"
Option "ModelName" "4036"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2720 1024
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2720 1024
EndSubSection
EndSection
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen 1 "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection
I have a Thinkpad T400 w/HD3470 graphics adapter and 1440x900 resolution sitting in a port replicator (DVI out available, external TFT with 1280x1024 resolution). The laptop runs Ubuntu 9.04. First I tried the radeon driver which gave an average 3D performance (not too important) but very high temperatures, even while idling. Yes, I tried the new DynamicPM and ForceLowPowerMode - the temperatur goes down but is still around 55degC. On the other hand switching between single head and big desktop via xrandr works like a charm. Even after suspend/resume w/o having to restart the X-server.
With the catalyst driver (v9.6, 8.620) it's the other way round: very good performance, very low temperature (40-45degC - at least 10degC cooler!!) but much trouble whith the secondary monitor. X only starts up correctly if the external TFT is disconnected. Then I can switch the secondary display on via xrandr and use a big desktop. But after suspend/resume I have to restart the X-server - otherwise the external TFT would stay black, even though it is listed by xrandr. Even disabling and enabling it via the gnome multi-monitor utility does not help.
Any ideas are greatly appreciated!
I'll attach my xorg.conf below
Cheers,
Torsten
-------------------------
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "LEN"
Option "ModelName" "4036"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2720 1024
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2720 1024
EndSubSection
EndSection
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen 1 "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection