I have been using Catalyst 9.1 with hd 4670 graphic card before i upgradet to 9.2.
Installation went well, and after restarting X everything looked like before. Next i wanted to test the video playback with metacity compositing enabled (its disabled by default so i had to enable it through gconf-editor). While resizing mplayer window my machine crashed. I had to hardreset bcos no keystrokes were accepted and the screen was just black.
After reboot the first unexpected behavoir was that gdm starts up with 1600x1200 resolution. Before it was 1280x1024. After doing some kind of research (web & logs) i discovered, that fglrx is using the supported edid modes. If i try to apply custom modelines in my xorg.conf it just fails by being ignored by fglrx.
As you can see in the last lines fglrx is using my monitor section from xorg.conf to DFP1. But DFP1 is not connected. The only connected monitor is on crt2. How can i force fglrx to use monitor section ("Sony") with crt2? Below is my xorg.conf.
I really dont know whats wrong. Before the crash everything worked like expected. Is it possible that this crash damaged my hardware? If you need further information dont bother to ask.
Before i forget. When i open amd control Center it take about 15 seconds to open. While loading the programm my monitor is flickering a bunch of times. I found out, that every flickering produces output in my xorg log files.
Obviously switching back to 9.1 does not solve anything. Since the crash everything is fucked up
Installation went well, and after restarting X everything looked like before. Next i wanted to test the video playback with metacity compositing enabled (its disabled by default so i had to enable it through gconf-editor). While resizing mplayer window my machine crashed. I had to hardreset bcos no keystrokes were accepted and the screen was just black.
After reboot the first unexpected behavoir was that gdm starts up with 1600x1200 resolution. Before it was 1280x1024. After doing some kind of research (web & logs) i discovered, that fglrx is using the supported edid modes. If i try to apply custom modelines in my xorg.conf it just fails by being ignored by fglrx.
Code:
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000010, disabled=0x00000000 (II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2] (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: SNY Model: 571 Serial#: 6031663 (II) fglrx(0): Year: 2002 Week: 20 (II) fglrx(0): EDID Version: 1.2 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) fglrx(0): Sync: Separate Composite SyncOnGreen (II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24 (II) fglrx(0): Gamma: 2.50 (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): GTF timings supported (II) fglrx(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.605 (II) fglrx(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 720x400@88Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@67Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 832x624@75Hz (II) fglrx(0): 1024x768@87Hz (interlaced) (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): 1152x870@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 85 vid: 22897 (II) fglrx(0): #4: hsize: 1280 vsize 960 refresh: 75 vid: 20353 (II) fglrx(0): #5: hsize: 1280 vsize 960 refresh: 85 vid: 22913 (II) fglrx(0): #6: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 94.5 MHz Image Size: 312 x 234 mm (II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0 (II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0 (II) fglrx(0): Ranges: V min: 48 V max: 170 Hz, H min: 30 H max: 96 kHz, PixClock max 220 MHz (II) fglrx(0): Monitor name: CPD-G220 (II) fglrx(0): Serial No: 6031663 (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff004dd971052f095c00 (II) fglrx(0): 140c01020e2118962b0cc9a057479b27 (II) fglrx(0): 12484cffff803159455961597159814f (II) fglrx(0): 81598199a94fea240060410028303060 (II) fglrx(0): 130038ea1000001e000000fd0030aa1e (II) fglrx(0): 6016000a202020202020000000fc0043 (II) fglrx(0): 50442d473232300a20202020000000ff (II) fglrx(0): 00363033313636330a202020202000a4 (II) fglrx(0): End of Display1 EDID data -------------------- (II) fglrx(0): Output DFP1 using monitor section Sony (II) fglrx(0): Output DFP3 has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output TV has no monitor section (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section (II) fglrx(0): Output DFP1 disconnected (II) fglrx(0): Output DFP3 disconnected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 connected (II) fglrx(0): Output TV disconnected (II) fglrx(0): Output COMPONENT_VIDEO disconnected (II) fglrx(0): Output CRT2 using initial mode 1600x1200
Code:
Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen1" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "Files" # FontPath "/usr/X11R6/lib/X11/fonts/misc" # FontPath "/usr/share/fonts/X11/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/share/fonts/X11/Type1" # FontPath "/usr/X11R6/lib/X11/fonts/Type1" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "bitmap" Load "ddc" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" # Option "ButtonMapping" "1 2 3 6 7 8" # Option "Buttons" "8" # Option "Phys" "*/input0" # Option "Name" "Logitech USB-PS/2 Optical Mouse" # Option "Dev Phys" "usb-0000:00:03.1-2/input0" # Option "evBits" "+1-2" # Option "keyBits" "~272-287" # Option "relBits" "~0-2 ~6 ~8" Identifier "Configured Mouse" Driver "evdev" Option "CorePointer" Option "Device" "/dev/input/by-id/usb-Logitech_USB-PS.2_Optical_Mouse-event-mouse" # Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "Sony" HorizSync 30.0 - 96.0 VertRefresh 48.0 - 170.0 ModeLine "800x600@125" 89.6 800 880 1040 1120 600 602 614 640 Option "VendorName" "Some Vendor" Option "ModelName" "Some Model" Option "DPMS" "on" EndSection Section "Device" # Option "UseFastTLS" "1" # Option "NvAGP" "0" ## Option "NoLogo" "True" # Option "AllowGLXWithComposite" "1" # Option "AddARGBGLXVisuals" "True" # Option "DisableGLXRootClipping" "True" # Option "Coolbits" "1" # Option "TripleBuffer" "1" # Option "RenderAccel" "True" # Option "AccelMethod" "EXA" # Option "ConnectedMonitor" "CRT" # Option "BackingStore" "true" # Option "DamageEvents" "true" # Option "TexturedXrender" "on" # Option "XaaNoOffscreenPixmaps" "true" # Option "MonitorLayout" "CRT,CRT" # Option "Textured2D" "on" # Option "EnableMonitor" "crt2" Identifier "RV730XT" Driver "fglrx" Option "ForceMonitors" "crt1,crt2" BusID "PCI:1:00:0" EndSection Section "Screen" Identifier "Screen1" Device "RV730XT" Monitor "Sony" DefaultDepth 24 SubSection "Display" Depth 4 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600@125" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection
Before i forget. When i open amd control Center it take about 15 seconds to open. While loading the programm my monitor is flickering a bunch of times. I found out, that every flickering produces output in my xorg log files.
Obviously switching back to 9.1 does not solve anything. Since the crash everything is fucked up
Comment