EDID Modelines Direct From Your TV/Monitor (The Collection).

[Sleuth]

Somebody has EDID information for Compaq P700 crt monitor ?

The Compaq P700 crt monitor is listed as having the following modes:

1280x1024 60Hz 75Hz
1152x864 75Hz
1024x768 60Hz 75Hz 85Hz
832x624 74.5Hz
800x600 60Hz 75Hz 85Hz

Just match these up with modelines from above, eg,

1280x1024 60Hz would match with:

# 1280x1024 @ 60 Hz (VESA) HSync: 63.981 kHz
ModeLine "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +Hsync +Vsync

[Dinth]

The Compaq P700 crt monitor is listed as having the following modes:

1280x1024 60Hz 75Hz
1152x864 75Hz
1024x768 60Hz 75Hz 85Hz
832x624 74.5Hz
800x600 60Hz 75Hz 85Hz

Hmm i dont think that this list is complete. This monitor should support resolutions up to 1600x1200, and vrefresh in 1024x768 up to 100Hz.

[Sleuth]

Hmm i dont think that this list is complete. This monitor should support resolutions up to 1600x1200, and vrefresh in 1024x768 up to 100Hz.

Ohh,... I will check it out.

[Sleuth]

Hmm i dont think that this list is complete. This monitor should support resolutions up to 1600x1200, and vrefresh in 1024x768 up to 100Hz.

Yeah, I copied the wrong specs.

The Compaq P700 crt monitor has the following modes:

1600x1200 75Hz
1280x1024 60Hz 85Hz
1152x864 75Hz
1024x768 85Hz 110Hz
832x624 75Hz
800x600 85Hz 120Hz
640x480 60Hz 85Hz 120Hz

Clock speed 189 MHz
Horizontal frequency 30-92 kHz
Vertical frequency 50-120 Hz

http://www.monitorworld.com/Monitors/compaq/additional/QSMONPERF.pdf

Just match these up with modelines from above, eg,

1600x1200 @ 75 Hz would match with:

1600x1200 @ 75 Hz (VESA X-Server) HSync: 93.75 kHz
ModeLine "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync

[Sleuth]

Just noticed that the horizontal frequency of the above modeline is out of range. So, try this one with a lower HSync:

ModeLine "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz (VESA X-Server) HSync: 87.5 kHz

Hope this works.

[Historian]

So Jade still has a thread running.

Not bad for someone who was buried some time ago.