Hello,
I've just 'upgraded' from an AIW Rage Pro which used the r128 server
and ran with DRI, to a ATI Radeon 8500 LE. I can't get this ATI server
to use DRI. There is an error I see in the log, which talks
about the 'DRM device bus ID' not being found.
I'm new on this forum...How does one go about posting a full log with the 10000 charecter limit?
******************
Here is lspci -v
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at <ignored> (32-bit, prefetchable)
I/O ports at c000 [size=256]
Memory at f1000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
**Here below is a snippet of log, seems this is the problem.**
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
** And there is this part. ****
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon 8500 QL (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf2000000 - 0xf200007f (0x80) MX[B]
[5] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[6] -1 0 0xf0000000 - 0xf001ffff (0x20000) MX[B](B)
[7] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[8] -1 0 0xc0000000 - 0xc0000000 (0x1) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[12] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[14] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[16] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[17] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(WW) ****INVALID MEM ALLOCATION**** b: 0xc0000000 e: 0xc0000000 correcting
I've just 'upgraded' from an AIW Rage Pro which used the r128 server
and ran with DRI, to a ATI Radeon 8500 LE. I can't get this ATI server
to use DRI. There is an error I see in the log, which talks
about the 'DRM device bus ID' not being found.
I'm new on this forum...How does one go about posting a full log with the 10000 charecter limit?
******************
Here is lspci -v
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at <ignored> (32-bit, prefetchable)
I/O ports at c000 [size=256]
Memory at f1000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
**Here below is a snippet of log, seems this is the problem.**
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
** And there is this part. ****
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon 8500 QL (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf2000000 - 0xf200007f (0x80) MX[B]
[5] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[6] -1 0 0xf0000000 - 0xf001ffff (0x20000) MX[B](B)
[7] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[8] -1 0 0xc0000000 - 0xc0000000 (0x1) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[12] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[14] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[16] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[17] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(WW) ****INVALID MEM ALLOCATION**** b: 0xc0000000 e: 0xc0000000 correcting
Comment