Second monitor problem - ATI Driver 8.34.8 with 2.6.20 kernel

[leigh7659]

Hi

have been running 8.34.8 drivers with a 2.6.20 kernel and am having problems enabling my secondary monitor with "aticonfig --enable-monitor=tv". I get the following error:

Feb 22 18:08:36 localhost udev[4640]: removing device node '/dev/vcs7'
Feb 22 18:08:36 localhost kernel: iregl_irq_cleanup+0x121/0x1d0 [fglrx]
Feb 22 18:08:36 localhost kernel: [pg0+543752139/1069016064] firegl_takedown+0x89b/0xba0 [fglrx]
Feb 22 18:08:36 localhost kernel: [pg0+543747647/1069016064] firegl_release+0x12f/0x190 [fglrx]
Feb 22 18:08:36 localhost kernel: [pg0+543690919/1069016064] ip_firegl_release+0xe/0x11 [fglrx]
Feb 22 18:08:36 localhost kernel: [__fput+148/348] __fput+0x94/0x15c
Feb 22 18:08:36 localhost kernel: [filp_close+77/84] filp_close+0x4d/0x54
Feb 22 18:08:36 localhost kernel: [close_files+70/85] close_files+0x46/0x55
Feb 22 18:08:36 localhost kernel: [put_files_struct+20/60] put_files_struct+0x14/0x3c
Feb 22 18:08:36 localhost kernel: [do_exit+488/879] do_exit+0x1e8/0x36f
Feb 22 18:08:36 localhost kernel: [__dequeue_signal+93/110] __dequeue_signal+0x5d/0x6e
Feb 22 18:08:36 localhost kernel: [sys_exit_group+0/13] sys_exit_group+0x0/0xd
Feb 22 18:08:36 localhost kernel: [get_signal_to_deliver+585/623] get_signal_to_deliver+0x249/0x26f
Feb 22 18:08:36 localhost kernel: [do_signal+92/266] do_signal+0x5c/0x10a
Feb 22 18:08:36 localhost kernel: [signal_wake_up+30/31] signal_wake_up+0x1e/0x1f
Feb 22 18:08:36 localhost kernel: [specific_send_sig_info+120/128] specific_send_sig_info+0x78/0x80
Feb 22 18:08:36 localhost kernel: [tty_ioctl+761/840] tty_ioctl+0x2f9/0x348
Feb 22 18:08:36 localhost kernel: [ext3_discard_reservation+46/71] ext3_discard_reservation+0x2e/0x47
Feb 22 18:08:36 localhost kernel: [ext3_release_file+46/91] ext3_release_file+0x2e/0x5b
Feb 22 18:08:36 localhost kernel: [dput+24/342] dput+0x18/0x156
Feb 22 18:08:36 localhost kernel: [__fput+306/348] __fput+0x132/0x15c
Feb 22 18:08:36 localhost kernel: [sigprocmask+157/186] sigprocmask+0x9d/0xba
Feb 22 18:08:36 localhost kernel: [sys_rt_sigprocmask+79/181] sys_rt_sigprocmask+0x4f/0xb5
Feb 22 18:08:36 localhost kernel: [do_notify_resume+41/57] do_notify_resume+0x29/0x39
Feb 22 18:08:36 localhost kernel: [work_notifysig+19/25] work_notifysig+0x13/0x19
Feb 22 18:08:36 localhost kernel: =======================
Feb 22 18:08:36 localhost kernel: BUG: scheduling while atomic: XFree86/0x00000001/4253
Feb 22 18:08:36 localhost kernel: [schedule+87/1353] __sched_text_start+0x57/0x549
Feb 22 18:08:36 localhost kernel: [pg0+543755009/1069016064] firegl_irq_cleanup+0x121/0x1d0 [fglrx]
Feb 22 18:08:36 localhost kernel: [pg0+543752139/1069016064] firegl_takedown+0x89b/0xba0 [fglrx]
Feb 22 18:08:36 localhost kernel: [pg0+543747647/1069016064] firegl_release+0x12f/0x190 [fglrx]
Feb 22 18:08:36 localhost kernel: [pg0+543690919/1069016064] ip_firegl_release+0xe/0x11 [fglrx]
Feb 22 18:08:36 localhost kernel: [__fput+148/348] __fput+0x94/0x15c

etc etc

It kicks me out of gnome and restarts gnome so I'm back to the login screen. Annoyingly I can see the log in messages when I boot up on both monitors but when gnome starts it disappears from the tv. I can get 3D acceleration ok so I know the fglrx module is loaded ok and working.

I did have the 8.26.18 drivers working properly without any problems with the 2.6.18.2 kernel but then upgraded for other reasons....doh

Anyone seen this problem before? (had the same issues with the 8.33.6 drivers btw)

Any help much appreciated

Cheers

Leigh

[Michael]

What GPU are you using?

[leigh7659]

Card is an ATI 9600XT - GPU - I think - is an RV360