FGLRX 8.42 -> CRT issues.

[Dandeloreon]

Before i upgraded from the 8.40 driver My viewsonic A90 monitor worked flawlessly in dpms mode, but afterwards the fglrx driver keeps sending the monitor out of it's frequency ranges... is there any recommendations for this?

Edit:
I forgot to post some key information:
FGLRX Mode Readouts: ( with xrandr)

Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200
default connected 1280x1024+0+0 0mm x 0mm
   1600x1200      60.0  
   1280x1024      75.0*    70.0     60.0     47.0     43.0  
   1280x960       85.0  
   1152x864       85.0     75.0     70.0     60.0     47.0     43.0  
   1024x768       85.0     75.0     72.0     70.0     60.0     43.0    100.0     90.0  
   800x600        85.0     75.0     72.0     70.0     60.0     56.0    120.0    100.0     90.0  
   640x480        85.0     75.0     72.0     60.0    160.0    120.0    100.0     90.0  
   1280x720       60.0  
   720x480        60.0  
   640x400        75.0     60.0  
   512x384        75.0     60.0  
   400x300        75.0     60.0  
   320x240        75.0     60.0  
   320x200        75.0     60.0

FGLRX Readout via Monitor:
N/A -> monitor says out of frequency range.


Vesa Readouts ( using Xrandr )

Screen 0: minimum 640 x 400, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
   1280x1024      61.0* 
   1152x864       76.0  
   1024x768       85.0  
   800x600        85.0  
   640x480        86.0  
   720x400        86.0

vesa Monitor Read out:
Horizonal: 63.97khz
Vertical: 60.02hz

FGLRX 8.40.4 randr readout

Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1600 x 1200
default connected 1280x1024+0+0 0mm x 0mm
   1600x1200      60.0  
   1280x1024      75.0* 
   1280x960       85.0  
   1280x720       60.0  
   1152x864       75.0  
   1024x768       85.0     75.0     70.0     60.0     43.0  
   800x600        85.0     75.0     72.0     60.0     56.0  
   720x480        60.0  
   640x480        85.0     75.0     72.0     60.0  
   640x400        75.0     60.0  
   512x384        75.0     60.0  
   400x300        75.0     60.0  
   320x240        75.0     60.0  
   320x200        75.0     60.0

[Dandeloreon]

since no replies have happened, i posted some other information on a website i frequent which is ashentech.com and here's a link to the post i made that includes Link to screenshots of xvidtune output for both FGLRX 8.40 and 8.42.