Announcement

Collapse
No announcement yet.

[drm] Could not set DRM device bus ID.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [drm] Could not set DRM device bus ID.

    Hello,

    I've just 'upgraded' from an AIW Rage Pro which used the r128 server
    and ran with DRI, to a ATI Radeon 8500 LE. I can't get this ATI server
    to use DRI. There is an error I see in the log, which talks
    about the 'DRM device bus ID' not being found.

    I'm new on this forum...How does one go about posting a full log with the 10000 charecter limit?


    ******************
    Here is lspci -v

    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] (prog-if 00 [VGA controller])
    Subsystem: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
    Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
    Memory at <ignored> (32-bit, prefetchable)
    I/O ports at c000 [size=256]
    Memory at f1000000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at f0000000 [disabled] [size=128K]
    Capabilities: [58] AGP version 2.0
    Capabilities: [50] Power Management version 2

    **Here below is a snippet of log, seems this is the problem.**

    drmGetBusid returned ''
    (II) [drm] DRM interface version 1.0
    (EE) [drm] Could not set DRM device bus ID.
    (EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.

    ** And there is this part. ****

    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset ATI Radeon 8500 QL (AGP) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xf2000000 - 0xf200007f (0x80) MX[B]
    [5] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
    [6] -1 0 0xf0000000 - 0xf001ffff (0x20000) MX[B](B)
    [7] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
    [8] -1 0 0xc0000000 - 0xc0000000 (0x1) MX[B](B)
    [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [11] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
    [12] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
    [13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    [14] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
    [15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [16] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
    [17] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
    (WW) ****INVALID MEM ALLOCATION**** b: 0xc0000000 e: 0xc0000000 correcting

  • #2
    Use pastebin (google) and post the link here.

    Which driver and version are you using ?

    Comment


    • #3
      Originally posted by bridgman View Post
      Which driver and version are you using ?
      From Xorg.0.log

      X.Org X Server 1.4.0.90
      Release Date: 5 September 2007
      X Protocol Version 11, Revision 0
      Build Operating System: Slackware 12.1 Slackware Linux Project
      Current Operating System: Linux ira 2.6.24.5 #2 Wed Apr 30 14:13:52 CDT 2008 i586

      ***************************************

      (II) LoadModule: "radeon"
      (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
      (II) Module radeon: vendor="X.Org Foundation"
      compiled for 1.4.2, module version = 4.3.0
      Module class: X.Org Video Driver
      ABI class: X.Org Video Driver, version 2.0

      ***************************************

      Is this sufficient to answer your question?

      Driver - radeon module 4.3.0
      Xorg server version - 1.4.0.90

      Thanks for the pastebin tip, if you need it I'll try and post it here later.

      --UserX045

      Comment


      • #4
        Originally posted by bridgman View Post
        Use pastebin ...
        Sweet! Here you go:

        http://pastebin.com/m174ad4c2

        --UserX045

        Comment


        • #5
          Driver - radeon module 4.3.0
          Either the driver is not printing out the actual version number or you have a really old version. Current version is around 6.9.0.

          Where did you get the driver from ?

          Comment


          • #6
            Originally posted by bridgman View Post
            ... the driver is not printing out the actual version number ... Where did you get the driver from ?
            xf86-video-ati-6.9.0 is the Slackware-current package I have installed.

            Comment


            • #7
              Just as i got all of my info out there, this question seems to be dying out.

              I'm using the current X server, a pretty up to date kernel and libraries. And, I know that using an older r128 card and driver this setup can use DRI. Now with a newer r200 based card (Radeon 8500LE) I'm unable to use DRI.

              Anyone have experience with this type of error:
              (EE) [drm] Could not set DRM device bus ID.
              (EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.

              Thanks,

              BTW I've asked in the Xorg-users list and the DRI-users list, and it was suggested that this might be a more appropriate place to try and get help with this.

              --User0x45

              Comment


              • #8
                Have you tried building a newer drm? IIRC, the last time I saw this error it was from a user who compiled his drm with a different version of gcc than his kernel.

                Comment


                • #9
                  Originally posted by agd5f View Post
                  Have you tried building a newer drm? IIRC, the last time I saw this error it was from a user who compiled his drm with a different version of gcc than his kernel.
                  Hello, I just spent MLK Jr. Weekend wiping my machine and
                  installing a fresh Slackware 12.2

                  It uses X server 1.4.2

                  root# uname -r
                  2.6.27.7

                  It is all freshly compiled with gcc version 4.2.4

                  It is the same 'no DRI' message in the Xorg log:

                  Code:
                  (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
                  .....
                  drmGetBusid returned ''
                  (II) [drm] DRM interface version 1.0
                  (EE) [drm] Could not set DRM device bus ID.
                  (EE) RADEON(0): [dri] DRIScreenInit failed.  Disabling DRI.
                  init memmap
                  init common
                  init crtc1
                  init pll1
                  freq: 135000000
                  best_freq: 135000000
                  best_feedback_div: 20
                  best_ref_div: 2
                  best_post_div: 2
                  restore memmap
                  (II) RADEON(0): RADEONRestoreMemMapRegisters() :
                  (II) RADEON(0):   MC_FB_LOCATION   : 0xc7ffc000 0x1fff0000
                  (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
                  restore common
                  restore crtc1
                  restore pll1
                  finished PLL1
                  restore dac
                  (==) RADEON(0): Backing store disabled
                  (WW) RADEON(0): Direct rendering disabled
                  From lspci is the bus and the adapter

                  Code:
                  01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] (prog-if 00 [VGA controller])
                          Subsystem: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
                          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
                          Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
                          Latency: 64 (2000ns min), Cache Line Size: 32 bytes
                          Interrupt: pin A routed to IRQ 11
                          Region 0: Memory at <ignored> (32-bit, prefetchable)
                          Region 1: I/O ports at c000 [size=256]
                          Region 2: Memory at f1000000 (32-bit, non-prefetchable) [size=64K]
                          Expansion ROM at f0000000 [disabled] [size=128K]
                          Capabilities: [58] AGP version 2.0
                                  Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2
                                  Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
                          Capabilities: [50] Power Management version 2
                                  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                                  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                          Kernel modules: radeonfb
                  ..........
                  ..........
                  00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
                          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
                          Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
                          Latency: 0
                          Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
                          I/O behind bridge: 0000c000-0000cfff
                          Memory behind bridge: f0000000-f1ffffff
                          Prefetchable memory behind bridge: c8000000-d7ffffff
                          Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
                          BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
                                  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

                  Comment


                  • #10
                    Did you build a kernel with radeon drm support?

                    Comment

                    Working...
                    X