Announcement

Collapse
No announcement yet.

Open-Source ATI R500 3D Milestone!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #11
    Originally posted by NaterGator View Post
    Your DRM module is loading the R300 microcode and it looks like it is an old version. Are you sure you are loading the new DRM module you built? It normally drops them in /usr/local
    FYI, I have a working glxgears on my X1800 (R520) and the DRM kernel module (from Dave's repository) also says "loading R300 code". When I built the version that's packaged with the kernel, it does say loading R500 microcode, but I haven't tested that with Dave's mesa and it may not be compatible right now.

    edit: i applied the new microcode patch and everything is still OK. this guy's problems is most likely not related to which version of microcode.
    Last edited by surfer; 03-24-2008, 12:07 PM.

    Comment


    • #12
      Originally posted by surfer View Post
      FYI, I have a working glxgears on my X1800 (R520) and the DRM kernel module (from Dave's repository) also says "loading R300 code". When I built the version that's packaged with the kernel, it does say loading R500 microcode, but I haven't tested that with Dave's mesa and it may not be compatible right now.
      Dave created his r500 branch before I merged the new microcode. It's easy enough to merge master into Dave's branch though. At this point, I doubt you'll see much difference however.

      Comment


      • #13
        Radeon driver on Mobility Radeon x1600(M56P)

        I installed the Radeon driver following this post here.

        My chip is not recognized, see glxinfo below.

        Code:
        brian@defiant:~$ LIBGL_DEBUG=verbose glxinfo
        name of display: :0.0
        libGL: XF86DRIGetClientDriverName: 5.3.0 r300 (screen 0)
        libGL: OpenDriver: trying /usr/lib/dri/r300_dri.so
        drmOpenDevice: node name is /dev/dri/card0
        drmOpenDevice: open result is 4, (OK)
        drmOpenByBusid: Searching for BusID pci:0000:01:00.0
        drmOpenDevice: node name is /dev/dri/card0
        drmOpenDevice: open result is 4, (OK)
        drmOpenByBusid: drmOpenMinor returns 4
        drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
        unknown chip id 0x71c5, can't guess.
        libGL warning: 3D driver returned no fbconfigs.
        libGL error: InitDriver failed
        libGL error: reverting to (slow) indirect rendering
        display: :0  screen: 0
        direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
        server glx vendor string: SGI
        server glx version string: 1.2
        Is my chip not supported yet, or did I mess something up?

        Comment


        • #14
          Originally posted by kaimerra View Post
          Is my chip not supported yet, or did I mess something up?
          Thread necromancer!

          Are you sure you're running the newly compiled driver and not the one shipped with your distro? Sounds like you're running an old version of the driver. A quick search on Google indicates that a few other people have had the same issue, and it turned out to be that the wrong driver was being loaded.

          Comment

          Working...
          X