Announcement

Collapse
No announcement yet.

VBE Modesetting Dumps For Avivo R500 Driver

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #11
    I don't know what the Ubuntu recovery mode does, so try typing

    init 3
    /etc/init.d/gdm stop
    rmmod fglrx
    rmmod radeon

    I hope that helps...

    Comment


    • #12
      Thx, it worked

      I'll edit this post later about the way I proceeded with Ubuntu and will try a way around the issue mentionned by Peter Cruickshank about the blinking cursor and no display after vbetest run.

      Comment


      • #13
        are the console framebuffer drivers interfering with this one (e.g. vesafb) ? do they also need to be disabled?

        Comment


        • #14
          I had a problem, too, after running vbetest. I couldn't read anything, so I just typed gdm and then after it started quit it again.

          Comment


          • #15
            Some more results, a Dell Inspiron 6400, ati x1400, 1680x1050 display.

            http://www.thump.dyndns.org/vbetest

            All modes were tested and are available as individual files, or in a tarball.

            The native resolution of my display 1680x1050 is not a supported mode. That would be really nice to have.

            If there is more I can do to help, please let me know.

            Comment


            • #16
              Some output from a Lenovo T60 (x1400).

              http://www.dresco.co.uk/linux/x1400-t60.tgz

              Where vbetest showed two mode numbers for the same res/depth then I've included them both..

              Regards,
              Jon.

              Comment


              • #17
                Hi, just ran vbetest on X1250 (PCI ID 791e), here're the results:

                https://www.xentoo.info/files/vbetes...d_791e.tar.bz2
                or
                http://files-upload.com/files/441173...d_791e.tar.bz2

                This is related with this post.

                Hope it helps.

                Comment


                • #18
                  vbetest results for a Sapphire X1650pro AGP card:

                  http://www.munton.demon.co.uk/sapphire_1650_agp.tar.bz2

                  Comment


                  • #19
                    Results for x1950pro PCI-E:
                    http://users.zenwalk.org/user-accoun...950pro.tar.bz2

                    lspci -v:
                    Code:
                    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon X1950 Pro (Primary) (PCIE) (prog-if 00 [VGA])
                            Subsystem: Micro-Star International Co., Ltd. Unknown device 0762
                            Flags: bus master, fast devsel, latency 0, IRQ 16
                            Memory at e0000000 (64-bit, prefetchable) [size=256M]
                            Memory at f5000000 (64-bit, non-prefetchable) [size=64K]
                            I/O ports at 8000 [size=256]
                            [virtual] Expansion ROM at f4000000 [disabled] [size=128K]
                            Capabilities: [50] Power Management version 2
                            Capabilities: [58] Express Endpoint IRQ 0
                            Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                    
                    01:00.1 Display controller: ATI Technologies Inc Radeon X1950 Pro (Secondary) (PCIE)
                            Subsystem: Micro-Star International Co., Ltd. Unknown device 0763
                            Flags: bus master, fast devsel, latency 0
                            Memory at f5010000 (64-bit, non-prefetchable) [size=64K]
                            Capabilities: [50] Power Management version 2
                            Capabilities: [58] Express Endpoint IRQ 0
                    ++

                    Bip

                    Comment


                    • #20
                      I made dumps on my Thinkpad T60p (firegl v5200). The console got corrupted after showing the image - it wasn't showing any characters, only the mouse pointer and the place of typing. So I rebooted each time to get a new dumb.
                      http://xtruder.homelinux.net/~ambro/fireglv5200.tar.bz2

                      Comment

                      Working...
                      X