Announcement

Collapse
No announcement yet.

Black Display Freezing after a while

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Black Display Freezing after a while

    Hi,

    I've installed with succes the new 8.31.5 ATI driver on my fc6.
    It works perfectly on my laptop Dell 610 with X300 graphical card.

    Problem is when i, plug an external display + "a big display" xorg.conf my computer just freezes after a while (before this freeze it works fine).

    I've got the following message into the /var/log/Xorg.0.log file.
    (II) fglrx(0): [drm] removed 1 reserved context for kernel
    (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xd000 at 0xb7e95000
    (EE) fglrx(0): === [swlDalHelperSetControllerConfigForRemap] === CWDDC ControllerSetConfig failed: 6 - 0

    Here is the copy of my dual display (big display) config file (/etc/X11/xorg.conf):
    # Xorg configuration created by system-config-display

    Section "ServerLayout"
    Identifier "srv_layout"
    Screen "aticonfig-Screen[0]" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Synaptics" "CorePointer"
    EndSection

    Section "Files"
    EndSection

    Section "Module"
    Load "dri"
    Load "glx"
    Load "extmod"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
    EndSection

    Section "InputDevice"
    Identifier "Synaptics"
    Driver "synaptics"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "auto-dev"
    Option "Emulate3Buttons" "yes"
    Option "LeftEdge" "120"
    Option "RightEdge" "830"
    Option "TopEdge" "120"
    Option "BottomEdge" "650"
    Option "FingerLow" "14"
    Option "FingerHigh" "15"
    Option "MaxTapMove" "110"
    Option "VertScrollDelta" "20"
    Option "HorizScrollDelta" "20"
    Option "MinSpeed" "0.3"
    Option "MaxSpeed" "0.75"
    EndSection

    Section "Monitor"

    ### Comment all HorizSync and VertSync values to use DDC:
    Identifier "aticonfig-Monitor[0]"
    ModelName "LCD Panel 1400x1050"
    ### Comment all HorizSync and VertSync values to use DDC:
    HorizSync 31.5 - 90.0
    VertRefresh 59.0 - 75.0
    Option "dpms"
    # Option "VendorName" "ATI Proprietary Driver"
    # Option "ModelName" "Generic Autodetecting Monitor"
    EndSection

    Section "Monitor"
    Identifier "aticonfig-Monitor[1]"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection

    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "fglrx"
    Option "AGPMode" "4"
    Option "/etc/X11/xorg.conf.fglrx-28" "-28"
    Option "OverlayOnCRTC2" "1"
    Option "UseEDID" "FALSE"
    Option "AddARGBGLXVisuals" "TRUE"
    BusID "PCI:1:0:0"
    EndSection

    Section "Device"
    Identifier "aticonfig-Device[1]"
    Driver "fglrx"
    Option "AGPMode" "4"
    Option "UseEDID" "FALSE"
    Option "AddARGBGLXVisuals" "TRUE"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection

    Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device "aticonfig-Device[0]"
    Monitor "aticonfig-Monitor[0]"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    Section "Screen"
    Identifier "aticonfig-Screen[1]"
    Device "aticonfig-Device[1]"
    Monitor "aticonfig-Monitor[1]"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024"
    EndSubSection
    EndSection

    Section "Extensions"
    Option "Composite" "Disable"
    EndSection

    Any idea, of what is wrong there ?

    Sherl
Working...
X