Announcement

Collapse
No announcement yet.

Need Assistance with Dual 7870 Eyefinity Cards on 12-monitor Video Wall

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need Assistance with Dual 7870 Eyefinity Cards on 12-monitor Video Wall

    Hi all,
    My organization has a 12-monitor video wall powered by a single Linux machine with Fedora 18 installed. Previously, we have used a single AMD Eyefinity card and then used splitter boxes to feed the signal out to the 12 monitors (6 outputs from the Eyefinity card become 12 outputs to the monitors). This was workable, but had some problems.

    Recently, we have decided to upgrade to two AMD 7870 Eyefinity cards with the idea of ditching the splitter boxes (which were starting to fail) and possibly getting better performance. Unfortunately, we are running into some problems with this set-up.

    1) So far, at best, the machine will recognize two separate 6-monitor displays. If Xinerama is active, then windows can span the two displays, but 3D performance is extremely poor and the two displays are out of sync. Additionally, when a window is maximized (set to "full screen") it only does so in a single monitor. With Xinerama disabled, 3D performance returns but only for one 6-monitor display at a time and windows can no longer span the the two displays or be dragged between them.

    2) We tried enabling the MGPU_SLS option after creating a GPU chain, but that did not provide any benefit.

    We have seen the video by Matthew Tippett showing a Linux box with 4 cards doing what we are attempting - this was part of our reason for going this route. Hopefully, there is some solution to get the two cards to work together properly as a single display.

    Here is our xorg.conf as it currently stands:

    Code:
    Section "ServerLayout"
    	Identifier     "aticonfig Layout"
    	Screen      0  "aticonfig-Screen[0]-0" 0 0
    	Screen         "aticonfig-Screen[1]-0" 2732 0
    EndSection
    
    Section "Module"
    EndSection
    
    Section "ServerFlags"
    	Option      "Xinerama" "on"
    EndSection
    
    Section "Monitor"
    	Identifier   "aticonfig-Monitor[0]-0"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    EndSection
    
    Section "Monitor"
    	Identifier   "aticonfig-Monitor[1]-0"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    EndSection
    
    Section "Monitor"
    	Identifier   "0-DFP1"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "0 0"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "0-DFP5"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "1366 0"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "0-DFP17"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "0 768"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "0-DFP21"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "1366 768"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "0-DFP9"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "0 1536"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "0-DFP13"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "1366 1536"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "1-DFP1"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "0 0"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "1-DFP5"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "1366 0"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "1-DFP17"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "0 768"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "1-DFP21"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "1366 768"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "1-DFP9"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "0 1536"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Monitor"
    	Identifier   "1-DFP13"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    	Option	    "PreferredMode" "1366x768"
    	Option	    "TargetRefresh" "60"
    	Option	    "Position" "1366 1536"
    	Option	    "Rotate" "normal"
    	Option	    "Disable" "false"
    EndSection
    
    Section "Device"
    	Identifier  "aticonfig-Device[0]-0"
    	Driver      "fglrx"
    	Option	    "Monitor-DFP1" "0-DFP1"
    	Option	    "Monitor-DFP5" "0-DFP5"
    	Option	    "Monitor-DFP17" "0-DFP17"
    	Option	    "Monitor-DFP21" "0-DFP21"
    	Option	    "Monitor-DFP9" "0-DFP9"
    	Option	    "Monitor-DFP13" "0-DFP13"
    	BusID       "PCI:6:0:0"
    EndSection
    
    Section "Device"
    	Identifier  "aticonfig-Device[1]-0"
    	Driver      "fglrx"
    	Option	    "Monitor-DFP1" "1-DFP1"
    	Option	    "Monitor-DFP5" "1-DFP5"
    	Option	    "Monitor-DFP17" "1-DFP17"
    	Option	    "Monitor-DFP21" "1-DFP21"
    	Option	    "Monitor-DFP9" "1-DFP9"
    	Option	    "Monitor-DFP13" "1-DFP13"
    	BusID       "PCI:5:0:0"
    EndSection
    
    Section "Screen"
    	Identifier "aticonfig-Screen[0]-0"
    	Device     "aticonfig-Device[0]-0"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Virtual   2732 2304
    		Depth     24
    	EndSubSection
    EndSection
    
    Section "Screen"
    	Identifier "aticonfig-Screen[1]-0"
    	Device     "aticonfig-Device[1]-0"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Virtual   2732 2304
    		Depth     24
    	EndSubSection
    EndSection

    Thank you for any help you can provide.

  • #2
    Do you use Zotac MDP2HD or which kind of splitters?

    If you were referring to the 24 Monitor Eyefinity Techdemo http://www.youtube.com/watch?v=N6Vf8R_gOec that was more of a Gundam, and relied on particular features of X-plane (rendering slaves).

    Comment


    • #3
      Originally posted by chithanh View Post
      Do you use Zotac MDP2HD or which kind of splitters?

      If you were referring to the 24 Monitor Eyefinity Techdemo http://www.youtube.com/watch?v=N6Vf8R_gOec that was more of a Gundam, and relied on particular features of X-plane (rendering slaves).
      We were previously using Accel brand DP to DVI splitters. Right now, though we don't have any splitters. We would like to have a 1 to 1 ratio between video card ports and monitors so that we don't have to rely on splitters.

      That is the video that I am referring to. I figured that it was a kind of proof-of-concept rather than a typical set-up, but I was hoping that there might be some clue as to how to configure a system that way since it was done in that case. The fact that it relied on X-Plane does explain a lot about it. Still, if anyone has any further ideas on the subject it would be great.

      Thanks for the response.

      Comment


      • #4
        Originally posted by Steely View Post
        Still, if anyone has any further ideas on the subject it would be great.
        Try to ask on AMD forum: http://devgurus.amd.com/community/general_discussions
        Personally I doesn't sure what you have here: bug or limitation of hardware/driver.

        Comment

        Working...
        X