Announcement

Collapse
No announcement yet.

X1250 + fglrx + HDMI: X will not start

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #11
    Sorry, I was busy last days.

    Code:
    (II) RADEON(0): EDID data from the display on output: HDMI-0 ----------------------
    (II) RADEON(0): Manufacturer: FUS  Model: 7a6  Serial#: 1
    (II) RADEON(0): Year: 2008  Week: 39
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 51  vert.: 29
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.644 redY: 0.336   greenX: 0.295 greenY: 0.614
    (II) RADEON(0): blueX: 0.146 blueY: 0.072   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported VESA Video Modes:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported Future Video Modes:
    (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    (II) RADEON(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
    (II) RADEON(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
    (II) RADEON(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
    (II) RADEON(0): Supported additional Video Mode:
    (II) RADEON(0): clock: 148.5 MHz   Image Size:  509 x 286 mm
    (II) RADEON(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
    (II) RADEON(0): v_active: 1080  v_sync: 1089  v_sync_end 1095 v_blanking: 1125 v_border: 0
    (II) RADEON(0): Ranges: V min: 49 V max: 76 Hz, H min: 15 H max: 82 kHz, PixClock max 170 MHz
    (II) RADEON(0): Monitor name: LSL 3230T
    (II) RADEON(0): Serial No: YE8J003765
    (II) RADEON(0): Number of EDID sections to follow: 1
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff001ab3a60701000000
    (II) RADEON(0): 	2712010380331d782ac9a5a4564b9d25
    (II) RADEON(0): 	125054a54b008180a9409500b3000101
    (II) RADEON(0): 	010101010101023a801871382d40582c
    (II) RADEON(0): 	9600fd1e1100001e000000fd00314c0f
    (II) RADEON(0): 	5211000a202020202020000000fc004c
    (II) RADEON(0): 	534c2033323330540a202020000000ff
    (II) RADEON(0): 	005945384a3030333736350a20200157
    finished output detect: 1
    finished all detect

    Comment


    • #12
      So, this modeline would be good for you:

      # 1920x1080 @ 60Hz hsync: 67.5kHz (EDID from Fujitsu-Siemens, Amilo LSL 3230T)
      Modeline "1920x1080" 148.5 1920 2008 2052 2200 1080 1089 1095 1125 +hsync +vsync

      Comment


      • #13
        Originally posted by Jade View Post
        So, this modeline would be good for you:

        # 1920x1080 @ 60Hz hsync: 67.5kHz (EDID from Fujitsu-Siemens, Amilo LSL 3230T)
        Modeline "1920x1080" 148.5 1920 2008 2052 2200 1080 1089 1095 1125 +hsync +vsync
        mactas, did you fudge the raw modeline numbers a tiny bit?

        You see, together they don't correspond to any other EDID info I have found.


        # 1920x1080 @ 24 Hz (EDID) HSync: 26.9673 kHz
        ModeLine "1920x1080" 74.16 1920 2558 2602 2750 1080 1084 1089 1125 +Hsync +Vsync
        # 1920x1080 @ 25 Hz (EDID) HSync: 28.125 kHz
        ModeLine "1920x1080" 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +Hsync +Vsync
        # 1920x1080 @ 30 Hz (EDID) HSync: 33.7159 kHz
        ModeLine "1920x1080" 89.01 1920 2448 2492 2640 1080 1084 1089 1125 +Hsync +Vsync
        # 1920x1080 @ 50 Hz (EDID) HSync: 56.25 kHz
        ModeLine "1920x1080" 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +Hsync +Vsync
        # 1920x1080 @ 60 Hz (EDID) HSync: 67.4318 kHz
        ModeLine "1920x1080" 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +Hsync +Vsync
        # 1920x1080 @ 60 Hz (EDID) HSync: 67.5 kHz
        ModeLine "1920x1080" 148.50 1920 2008 2052 2200 1080 1084 1088 1125 -Hsync -Vsync
        # 1920x1080 @ 50 Hz (EDID) HSync: 28.125 kHz
        ModeLine "1920x1080" 74.25 1920 2448 2492 2640 1080 1084 1094 1124 +Hsync +Vsync Interlace
        # 1920x1080 @ 60 Hz (EDID) HSync: 33.7182 kHz
        ModeLine "1920x1080" 74.18 1920 2008 2052 2200 1080 1084 1094 1124 +Hsync +Vsync Interlace
        Last edited by Jade; 11-18-2008, 05:37 AM.

        Comment


        • #14
          still my X does not start, even with fglrx 9.01 and ubuntu 8/10. I can see the spashscreen end even the console. but x will not start. there aren't any errors in the x-log.

          Comment


          • #15
            A couple of things :

            1. Some people are reporting a "boot to black screen" problem when they restart after using aticonfig commands to get rid of the underscan. Resetting or deleting the amdpcsdb file seems to get around that, although underscan comes back. I think you need to run aticonfig --initial after deleting admpcsdb but not 100% sure.

            2. Installing fglrx over-writes some files which are used by radeon (and newer versions of radeonhd). You need to uninstall fglrx completely to use radeon or radeonhd; you can't just switch back and forth by changing the conf file.

            HTH

            Comment

            Working...
            X